How to accept decoration tiles
In home decoration, the quality of ceramic tiles directly affects the overall appearance and service life. How to correctly accept ceramic tiles has become the focus of many owners. The following is a summary of the hot topics on the Internet in the past 10 days regarding ceramic tile acceptance, combined with structured data to provide you with detailed guidance.
1. Preparation for ceramic tile acceptance
Before accepting ceramic tiles, make sure the following tools are ready:
| Tool name | Purpose |
|---|---|
| spirit level | Check whether the tiles are level |
| Empty drum hammer | Check whether the tiles have hollowing phenomenon |
| tape measure | Measure whether the ceramic tile gaps are even |
| flashlight | Check the tile surface for scratches or discoloration |
2. Detailed steps for ceramic tile acceptance
1.Check the appearance of tiles
First observe whether there are cracks, scratches, color differences or stains on the surface of the tiles. Pay special attention to the integrity of edges and corners to ensure that each tile has no obvious flaws.
2.Check the flatness of ceramic tiles
Use a spirit level to measure whether the tile surface is even. If unevenness is found, rework must be requested promptly.
| flatness standard | Allowable error range |
|---|---|
| wall tiles | ≤2mm/2m |
| Floor tiles | ≤3mm/2m |
3.Detect ceramic tile hollowing
Tap the tile lightly with a hollow hammer and listen to the sound to determine whether it is hollow. If the hollow area exceeds 5%, it must be re-paved.
| hollow position | Processing method |
|---|---|
| Hollow corners | Can be repaired with grouting |
| hollow center | Need to be re-paved |
4.Check tile gaps
The gaps between tiles should be even and consistent, usually leaving a gap of 2-3mm. Use a tape measure to make sure the gap is as wide as required.
5.Check the yin and yang angle
The tiles at the corners should be aligned vertically, and it is recommended to chamfer them at 45 degrees to avoid edge chipping.
3. Common problems and solutions
| Question type | solution |
|---|---|
| The color difference is obvious | Request to replace tiles from the same batch |
| Uneven paving | Partial or complete rework |
| Large hollow area | Demolition and resurfacing |
| Uneven gaps | Re-pointing |
4. Things to note after acceptance
1. After passing the inspection, it is recommended to take photos and keep them as future maintenance certificates.
2. Ceramic tiles need to be cured for more than 24 hours after being laid before they can be stepped on.
3. It is recommended that the beautiful joint construction be carried out 3-7 days after the tiles are laid.
Through the acceptance method of the above system, you can ensure that the quality of ceramic tile paving meets the standard, which is an important step for your home decoration. If serious problems are discovered, be sure to make rectification requests before the decoration company leaves the site to avoid later disputes.
check the details
check the details
en
