How to add coolant to Mercedes Benz
Recently, the hot topic about car maintenance continues to heat up, especially the daily maintenance issues of luxury car brands such as Mercedes-Benz. Coolant is a key factor in the normal operation of the engine, and its addition and replacement methods have become the focus of heated discussion among car owners. This article will combine the hot content on the Internet in the past 10 days to provide you with a detailed analysis of the steps and precautions for adding coolant to Mercedes-Benz models.
1. Inventory of popular car maintenance topics on the Internet
| Ranking | Topic keywords | Search volume (10,000) | Main discussion platform |
|---|---|---|---|
| 1 | New energy vehicle maintenance | 58.7 | Weibo/Zhihu |
| 2 | Luxury car routine maintenance | 42.3 | Autohome/Understanding Car Emperor |
| 3 | Coolant replacement cycle | 35.6 | Douyin/Bilibili |
| 4 | DIY car repair | 28.9 | Kuaishou/Xiaohongshu |
2. Guide to the whole process of adding Mercedes-Benz coolant
1. Preparation
• Make sure the vehicle is in a cool-down state (it is recommended to leave it alone for more than 30 minutes)
• Prepare the original manufacturer specified model coolant (see the table below for commonly used Mercedes-Benz models)
• Prepare a clean funnel, rubber gloves, absorbent cloth and other tools
| Mercedes-Benz model series | Recommended coolant model | Capacity (L) |
|---|---|---|
| Class C/Class E | MB 325.0 certification | 6.5-7.2 |
| S-Class/GLE | MB 325.5 certification | 8.0-9.5 |
| AMG series | MB 325.8 certification | 9.0-10.5 |
2. Operation steps
(1) Open the engine compartment and locate the coolant reservoir (usually a white translucent tank marked with the word "COOLANT")
(2) Check the current liquid level, it should be between the MIN-MAX scale lines
(3) Rotate the pressure cap 1/4 turn counterclockwise to release the residual pressure and then open it completely
(4) Use a funnel to slowly add coolant to about 1cm below the MAX line.
(5) Check the liquid level again after letting it sit for 2 minutes, and refill if necessary.
(6) After confirming that everything is correct, tighten the pressure cap.
3. Precautions
•strictly prohibitedOpen the cooling system directly when the temperature is high
• Different types of coolantsNot to be mixed
• If coolant needs to be replenished frequently, there may be a leakage problem
• Coolant should be completely replaced every 2 years or 40,000 kilometers
• Pay attention to the freezing point indicator of antifreeze in winter
3. Answers to recent hot questions from car owners
| question | Professional answers | Related models |
|---|---|---|
| What should I do if the coolant becomes turbid? | Clean the system immediately and replace all coolant | 2018 E-Class |
| Can I add distilled water for emergency use? | Only add a small amount, and the standard coolant needs to be replaced as soon as possible afterwards. | Common to all series |
| How to deal with electronic liquid level alarm? | Check the actual liquid level first, then troubleshoot sensor failure | 2020 later models |
4. Expert advice
According to Mercedes-Benz’s official technical bulletin (updated in October 2023), car owners are advised to:
1. Routinely check the coolant status every quarter
2. Give priority to Mercedes-Benz original certified coolant
3. For complex problems, please contact the authorized service center in time
4. When modifying a vehicle, special attention must be paid to the matching of the cooling system
Recent data from the topic "Misunderstandings in Luxury Car Maintenance" on Douyin platform shows that about 37% of Mercedes-Benz owners use coolant improperly. Correctly adding coolant can not only extend the life of the engine, but also effectively prevent high-temperature failures. It is recommended that car owners collect the guidance in this article and perform regular maintenance on the vehicle cooling system.
check the details
check the details
en
