Title: How to do line brushing
introduction
Flash refers to writing firmware packages directly into the storage of mobile phones or other devices through wire flash tools. It is usually used for system upgrades, repairing system faults or unlocking devices. In recent years, wire brushes have become a hot topic due to their efficiency and flexibility. This article will introduce in detail the steps, precautions and hot topics related to line brushing in the past 10 days.
1. Basic steps of line brushing
The main steps of line brushing are as follows:
| step | Operating Instructions |
|---|---|
| 1. Preparation | Download the wire flash tool and firmware package and back up device data. |
| 2. Enter flash mode | Enter the device's flash mode (such as Fastboot or Download mode) through a key combination or command line. |
| 3. Connect the device | Connect the device to the computer using the data cable and make sure the driver is installed. |
| 4. Perform line brushing | Run the wire flash tool, select the firmware package and start flashing the phone. |
| 5. Complete the reboot | After the flashing is completed, restart the device and check whether the system is normal. |
2. Popular online brushing topics in the past 10 days
The following are topics related to line brushing that have been hotly discussed on the Internet in the past 10 days:
| topic | heat index | Main content |
|---|---|---|
| Xiaomi mobile phone wire brush unlocks BL lock | ★★★★★ | Xiaomi users are hotly discussing how to unlock the bootloader through wire flashing to install third-party ROMs. |
| Huawei Hongmeng system wire brushing tutorial | ★★★★☆ | Huawei users share their Hongmeng system online flash experience and discuss compatibility and stability. |
| Samsung mobile phone brush to save bricks | ★★★☆☆ | Samsung users asked for help from system failures and discussed how to use the Odin tool to save the system from bricks. |
| OnePlus mobile phone flashes Oxygen OS | ★★★☆☆ | OnePlus users discuss how to replace the National Bank system with Oxygen OS through wire brushing. |
3. Precautions for line brushing
Although line brushing is powerful, it also has risks. The following are things to pay attention to:
1.Back up data: Wire flashing will clear device data, so be sure to back up important files in advance.
2.Choose the right firmware package: Wrong firmware may cause the device to become bricked. Make sure the firmware matches the device model exactly.
3.Sufficient battery: A power outage during the flashing process may cause damage to the device. It is recommended that the battery power be kept above 50%.
4.Use official tools: Try to use line brush tools provided by the manufacturer to avoid risks caused by third-party tools.
4. Frequently Asked Questions
The following are line brushing questions and answers frequently asked by users:
| question | answer |
|---|---|
| What should I do if the device cannot be turned on after wire flashing? | Try re-flashing the firmware, or use the official brick rescue tool to repair it. |
| Will the wire brush lose its warranty? | Some manufacturers will cancel the warranty due to wire brushing to unlock the bootloader, so you need to understand the policy in advance. |
| What is the difference between online swiping and card swiping? | The wire swipe is operated through the computer and is suitable for repairing serious faults; the card swipe is operated through the Recovery mode and is suitable for daily upgrades. |
Conclusion
Wire brushing is an effective means to solve equipment system problems, but it needs to be operated with caution. Through the steps and precautions in this article, I hope it will help you successfully complete the line brushing. If you have other questions, please leave a message in the comment area to discuss!
check the details
check the details
en
